How Much Does Siding Installation Cost in Sioux Falls, SD in 2026?

Last updated: 2026-09-11 · Sioux Falls, SD · 1848 words · 10 min read

Average Cost of Siding Installation in Sioux Falls

In Sioux Falls, South Dakota, the price you pay for a complete siding installation is directly tied to the national market but is moderated by the local cost factor of 0.93. This means that the typical range of $4.50 to $12.00 per square foot nationwide becomes roughly $4.19 to $11.16 per square foot after the adjustment. For a standard 1,500‑square‑foot home, the total installed cost therefore lands between about $9,000 and $20,000, depending on the material you choose and the scope of work required.

These figures include the three primary cost components that most contractors break down: material (about 50 % of the total), labor—including tear‑off, installation, and any required scaffolding (about 35 %), and the remaining 15 % for insulation, trim, and disposal of the old siding.

Siding Installation Cost by Material

Choosing the right siding material is the single biggest factor in your budget. Below is a quick reference that shows the adjusted per‑square‑foot cost for the most common options in Sioux Falls.

• Vinyl: $4.19 – $7.44 per sq ft. Vinyl is the most budget‑friendly choice and holds up well against the cold, dry winters typical of the region.
• Fiber cement: $6.05 – $10.23 per sq ft. This material offers superior durability, fire resistance, and moisture tolerance—important for a city that sees heavy snow and occasional wind‑driven rain.
• Engineered wood: $5.58 – $9.30 per sq ft. Engineered wood mimics the look of real wood at a lower price point and is less prone to warping.
• Real wood: $7.44 – $11.16 per sq ft. Premium wood siding delivers a classic appearance but requires more maintenance and a higher upfront investment.
• Metal (steel or aluminum): $6.51 – $11.16 per sq ft. Metal siding provides a long‑lasting, low‑maintenance exterior that resists dents and rust when properly coated.

When you multiply the per‑square‑foot cost by the square footage of your home, you can quickly estimate the total range for each material. For example, a 1,800‑sq ft two‑story home with vinyl siding would cost roughly $7,500 – $13,400, while the same home with real wood could run $13,400 – $20,100.

Cost by Project Size in Sioux Falls

Project size also influences the final price because larger homes generally benefit from economies of scale, yet they also require more labor hours and potentially more complex logistics such as scaffolding for higher walls.

• 1,200‑sq ft ranch (small single‑story): $5,022 – $13,392
• 1,800‑sq ft two‑story (average family home): $7,533 – $20,088
• 2,500‑sq ft home (large residence): $10,463 – $27,900

These totals already incorporate the local cost factor and assume a typical mix of material, labor, and trim. If you opt for a higher‑end material like real wood or metal, expect the upper end of each range to shift upward accordingly.

What Affects the Price in Sioux Falls?

Several variables can push the price above the baseline ranges:

• Wall area and number of stories: Two‑story homes require lifts, scaffolding, or boom lifts, adding labor costs that are slightly higher in Sioux Falls due to the need for specialized equipment during cold months.
• Material choice: As shown above, vinyl sits at the low end while real wood and metal sit at the high end. Fiber cement offers a middle ground of durability and cost.
• Tear‑off versus overlay: Removing existing siding typically adds $1,000 – $3,000 to the job. The advantage is that you can inspect and repair the sheathing, which can prevent future water intrusion.
• Trim, soffits, and fascia: Replacing these components at the same time adds material and labor, but it eliminates mismatched sections later and often qualifies for bundled pricing.

How to Save Money on Siding Installation in Sioux Falls

Homeowners can keep costs down without sacrificing quality by following a few proven strategies:

1. Request quotes for an overlay installation if the existing siding is flat, undamaged, and securely attached. This can shave $1,000 – $3,000 off the total.
2. Bundle related exterior work—such as new gutters, soffits, or fascia—with the siding project. Contractors frequently offer a discount for larger, combined jobs.
3. Schedule the installation during off‑peak months (late fall or early spring). Sioux Falls contractors tend to have lighter schedules then, which can translate into lower labor rates.
4. Buy siding material in full‑wall runs rather than by the sheet. This reduces waste, minimizes seams, and often qualifies for bulk‑order discounts from suppliers.

DIY vs. Hiring a Professional

While a motivated homeowner can install vinyl siding on a simple, single‑story ranch, the learning curve is steep for more complex jobs. Cutting and fitting corners, windows, and gables requires precision; mistakes are visible for decades. For two‑story homes, the need for scaffolding makes DIY impractical for most people. Fiber cement siding also demands special tools—such as a carbide‑tipped saw—and dust‑control measures that are best handled by trained crews. In Sioux Falls, hiring a licensed professional ensures compliance with local building codes and protects you from liability if an installation error leads to water damage.

What to Expect: The Siding Installation Process

A typical siding project in Sioux Falls follows these five steps:

1. Inspection and measurements: A contractor walks the entire perimeter, records wall dimensions, and notes any areas that may need extra attention, such as recessed windows or irregular angles.
2. Tear‑off of old siding and sheathing repair: Existing siding is removed, and the underlying sheathing is examined for rot, water damage, or nail pops. Any necessary repairs are completed before new material goes on.
3. House wrap and insulation board installation: A breathable house wrap is applied to protect against moisture, followed by rigid insulation boards if the homeowner has opted for added thermal performance.
4. Siding panels hung with proper flashing: New siding panels are attached using nails or screws, with flashing installed around windows, doors, and roof intersections to prevent leaks.
5. Trim, corners, final caulk, and cleanup: Exterior trim pieces, soffits, and fascia are installed, seams are caulked, and the site is cleared of debris.

How Long Does It Take in Sioux Falls?

For an average single‑family home, the actual on‑site work typically spans three to seven working days. The timeline can extend if the project includes a full tear‑off, extensive sheathing repairs, or custom‑ordered materials. Permit inspections and material lead times—especially for specialty finishes like wood grain or custom metal profiles—can add an additional one to three weeks before the crew steps onto the property.

Hidden Costs to Watch For

Even a well‑planned project can reveal unexpected expenses:

• Sheathing or rot repair: Once the old siding is removed, hidden damage may require plywood replacement, which can add $500 – $2,500 depending on the extent.
• New trim, soffits, fascia, or gutters: If these components are outdated or damaged, replacing them alongside the siding can increase the bill by $1,000 – $4,000.
• Permit fees and HOA approvals: Sioux Falls requires a building permit for most exterior remodels, typically $100 – $300. Homeowners association review may add additional paperwork and possible fees.
• Disposal fees: Hauling away old siding is usually bundled into the labor estimate, but large projects may incur extra disposal charges of $200 – $600.

Paying for Siding Installation

Many Sioux Falls siding contractors offer financing options ranging from 12 to 60 months. Because siding is a sizable investment, compare the contractor’s interest rate with alternatives such as a home‑equity line of credit or a personal loan. Some lenders provide promotional 0 % APR for the first 12 months, which can be attractive if you plan to pay the balance quickly.

When evaluating financing, factor in the total cost of the project—including any hidden expenses—so you can calculate the true monthly payment and ensure it fits within your budget.

Insurance Considerations

In Sioux Falls, homeowners insurance typically covers siding damage caused by hail, wind, or falling debris. Wear and tear, fading, or gradual deterioration are excluded. After a storm, document the damage with photos, obtain at least three contractor estimates, and file a claim promptly to stay within your policy’s reporting window. If you choose a premium material like real wood or metal, be sure to verify that your policy’s coverage limits are sufficient to replace the higher‑cost siding.

Does Siding Installation Increase Home Value?

Yes. A new siding installation generally recovers 65 % to 80 % of its cost at resale. In Sioux Falls, curb appeal is a major factor in buyer decisions because many neighborhoods feature homes built in the mid‑20th century with aging exteriors. A fresh, modern façade can set your property apart on the street, potentially shortening the time on market and supporting a higher asking price.

How to Choose a Contractor in Sioux Falls

Finding a reliable siding contractor involves more than a quick internet search. Follow these steps:

1. Verify licensing and insurance. South Dakota requires a contractor’s license for exterior work; ask to see both the license and general liability coverage.
2. Check references and online reviews. Look for contractors with a track record of completing projects on time and within budget in the Sioux Falls area.
3. Request detailed written estimates that break down material, labor, and any additional costs such as disposal or permits.
4. Ask about warranties. Quality manufacturers typically provide a 20‑year warranty on the material, while reputable installers may offer a workmanship guarantee of 5‑10 years.
5. Confirm the project schedule and availability. A contractor who can start during the off‑peak season may offer more competitive pricing.

Frequently Asked Questions

How much does siding cost in Sioux Falls? Installed siding in Sioux Falls runs about $4.19 to $11.16 per square foot after the local cost factor is applied. Vinyl is the most affordable option, while fiber cement, engineered wood, real wood, and metal fall into progressively higher price brackets. For a typical 1,500‑square‑foot home, total costs usually range from $9,000 to $20,000.

What is the best siding material for Sioux Falls weather? Both fiber cement and vinyl perform well in Sioux Falls’ cold winters and occasional wind‑driven rain. Fiber cement offers superior moisture resistance and impact durability, making it a solid long‑term investment. Vinyl, on the other hand, is more budget‑friendly and requires minimal maintenance. Your contractor can evaluate your home’s exposure to sun, wind, and moisture to recommend the optimal choice.

Does new siding increase home value? Yes. Siding typically recovers 65 % to 80 % of its installation cost at resale. In Sioux Falls, a fresh exterior is one of the first things potential buyers notice, helping your home stand out in a competitive market.

How long does siding installation take? For a standard single‑family home, the installation itself takes between three and seven working days. Projects that include full tear‑off, extensive sheathing repairs, or custom‑ordered materials may require additional time for permits and material delivery.

Should I repair or replace my siding? If more than 20 %–30 % of the wall is damaged or the siding is older than 20 years, replacement is usually more cost‑effective than repeated patch repairs. Replacement also gives you the opportunity to upgrade to a more durable material suited to Sioux Falls’ climate.

Is siding covered by insurance in Sioux Falls? Storm‑related damage such as hail or wind is typically covered by homeowners insurance. However, normal wear, fading, or gradual deterioration are not. Document any damage, obtain multiple repair estimates, and file your claim promptly to ensure coverage.